Taper lock bushing application
Timing Pulley with taper bush
Sprocket with taper bush
V Belt pulley with taper bush
Install
1.Clean shaft,bore anf outside of bush,and bore of hub.Remove any oil,laquer of dirf.Place bush in hub and match half holes to make comelete holes (Each comeplete hole will be threaded on one side only)
2.Lightly oil thread and point of set screw,or thread and under head of cap screws.Place screw loosely in holes that are threaded on hub side.
3.Make sure bush is free in hub.Slip assembly onto shaft and locate in the desired position.
4.Tighten screw alternately and evenly unitil all are pulled up tightly(See table for torque settings)
5.Hammer agsinst large end of bush using hammer and block or sleeve to aviod damage.Screws can noe be turned a little more to the specified torque setting.Repeat this alternate hammering and screw re-tightening unit the specified torque is reached.Fill all ho;es with grease to exclude dirt.
Remove
1.Remove all of screws.
2.Insert screws into removel holes that are threaded on the bush side.In sizes where washers are found under heads,be sure to use these washers.
3.Tighten screws alternately until bush is loosened in hub and then remove the complete assembly.If bush does not loosen immediately,tap on hub.
Recommended Wrench Torque
Tianjin OuNaiDa Transmissions Machinery Co., Itd is a manufacturer specializing in the production, processing and sales company of mechanical transmission parts.We have more than 10 years of production experience ,professional equipment and workers.Our main products are Taper bushing ,gear,gear rack, sprockets,roller chain,timing pulley etc
Work Shop
Warehouse
Lathe Machine
CNC Machine
Surface cleaning
Deburring
A: Stock products: 3-5 business days Made-to-order: Generally 15-25 business days after payment received
A: Tianjin,Shanghai
Standard Package:Carton ,Wooden case or as your need.Efficient logistics delivery upon customer requirement, we can supply express shipment, air shipment, truck shipment and sea shipment, etc
1) TT, 30% deposit , 70% before shippment.2) L/C at sight. (high bank charge, not suggest , but acceptable )3) 100% Western Union in advance. (specially for air shipment or small amoun)4) Small order by Paypal.