Cyclo Drive Reducer

Cycloidal pinwheel reducer is definitely a up-dated of brand-new type transmissing machine made with K-H-V less pearly whites engagement and the cycloidal pin steering wheel clenching mechanism, which are trusted in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Oil and chemical cranes, project machinery etc, conveyors and Industry. various fields.

1. Equipment is constructed of high power low carbon alloy metal by carburizing and quenching. The hardness of tooth surface can reach HRC58-62. CNC grinding technology is adopted for all with high accuracy, gears and good get in touch with performance
2. high transmission productivity: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light weight, long service existence and high bearing ability;
5. easy to check, assemble and disassemble.

Operation specifications and precautions
1.High modularization design: various equip with various electric motor or other power type conveniently.Same machine type may equip with numerous power motor. It is easy to understand the combination and
junction between every machine type.
2.Transmission ratio: great division, wide scope. The combined equipment type may form very large transmission ratio, i.e. productivity very low rotary speed.
3.Form of installation: the position to be installed is not limited.
4.High strength, small: the box body is made of huge strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and excellent grinding process, which means bearing capability of unitvolume is substantial.
5.Long life: Beneath the condition of right type chosen (including choosing appropriate operation parameters)normal procedure and maintenance, the life span of main parts of speed reducer (except sporting parts) should not be less than 20000 hours. The putting on parts include lubricating bearing, oil seal and oil.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is definitely low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High quickness ratio and efficiency
Single stage transmission may reach to at least one 1:87 of speed-downwards ratio and the efficiency is normally more than 90%. If make use of multi-speed travel the speed-down ratio is certainly bigger.
2. Compact
Being adapted epicyclic transmitting basic principle, the input and end result shaft are at same axis centre, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is bound at the minimum content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is easy, but it can recognize high reduction ratio unit.
2. Small gear clearance
The Travel, which meshes with ordinary gears and has minimal backlash, is vital to the controller business.
3. High precision
Multiple teeth are engaged simultaneously, and there are several gears engaged with 180 degree symmetry. Accordingly, the impact of tooth pitch error and cumulative tooth pitch mistake on the rotation accuracy is relatively average, making the position precision and rotation accuracy reach a very high level.
4. Less parts, easy installation
The three basic pieces achieve a higher deceleration ratio, and they are all on a single axis, therefore the kit is easy to install and easy to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the quantity is 1/3, the pounds is 1/2, but can obtain the same torque potential and reduction ratio, achieving small lightweight.
6 High torque capacity
Flexible wheel material USES distinctive steel with large fatigue strength.Not the same as ordinary transmission gadget, the amount of teeth meshing makes up about close to 30% of the full total quantity of teeth. In addition, it is in call with the surface, so that the pressure borne by each equipment is reduced and high torque capacity can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the power loss due to friction. Therefore, high lowering ratio can be achieved while maintaining high efficiency, and miniaturization of driving motor could be realized.
8. Low noise
The gear meshing cycle quickness is low, the transmission motion force balance, which means operation is quiet, and the vibration is very small.
◆Excessive speed ratio and large efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission can be used, the deceleration ratio will come to be larger.
◆Because planetary transmission theory is adopted, the suggestions shaft and outcome shaft are on the same axis line, in order that the machine unit can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is much larger, and the mechanism of balancing machine parts produces the vibration and voice limited by a minimum.
◆Reliable use and lengthy service life for the reason that primary parts are made of huge carbon chromium steel, great strength is obtained by quenching (HRC58-62), and rolling friction is employed in a few transmission contacts, so the service life is lengthy.
Cycloid reducer is going to be a cycloid needle teeth meshing planetary transmission principle drive models, is an excellent transmission has various advantages, versatile, and may be both negative and positive operation.

•Big ratio, and substantial efficiency Smooth operation,

• low noise The usage of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically zero wear, durable.

• Compact structure,

• little size Because the use of a planetary transmitting, the source shaft and the outcome shaft on the same axis, which makes the model to obtain the smallest possible size.

• Reasonable design, easy protection, and break down easily install,

• the least number of parts along with basic lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall planet pinion precision, improve the output strength and carrier.

(2).Hoop clamp coupling have five connection techniques ideal for different application environments.

(3).Size in this article PL/PF120(incorporating)precision and high power integral inner gear casing, processed in one station,which eliminate the cumulative error and assembling error of split type.Remove casting process;adopt scorching of forging process, that will decrease the blank material defects.

(4).The meshing equipment adopt shaving method after carburizing and quenching,which easier to make gear surface smooth and high precision,reduce the temperature rising due to gear area gluing and friction.
This series worm-gear reducer was built after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its performance and mounting dime nsions conform the same types of foreign.
The combination of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, radiate heat efficiently, low noise, beautiful shape and compact structure.
Very good sealing and adaptability.Its mixture with T equipment reducer and MB/MBN variator can meet all sorts of speed requirement.


As one of leading taper pulley manufacturers, suppliers and exporters of mechanical products, We offer taper pulley and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of taper pulley

Recent Posts